Close
MOTO-STOP WRENCHES
MOTO-STOP WRENCHES
All Moto-Stop wrenches are made of steel with a black oxide finish. The pin assembly is made up of a Allen cap screw with a replaceable treated dowel pin pressed into the body. This assembly design allows you to replace a pin if damaged by unscrewing the cap-screw and replacing it with a new one. Moto-Stop tilt cylinder wrenches have been specifically designed to solve the problem of removing the aluminum cap from the Yamaha OR Mercury tilt cylinder assembly without destroying it . We also sell replacement pins.
MERCURY WRENCHES
MERCURY WRENCHES
MERCURY FUEL FILTER REMOVAL WRENCH
MERCURY FUEL FILTER REMOVAL WRENCH
Replace fuel filters fast with the six toothed Mercury Fuel Filter Wrench. Designed to catch all groves and give its user maximum leverage. Simply attach the wrench onto your fuel filter and turn. Don’t break your filter with the wrong tool, get the Mercury Fuel Filter Wrench from Moto-Stop.
Fuel Filter-Star is made of 1/4" thick mild steel with a black zinc coating for quality and durability.MEASURE YOUR ASSEMBLY PRIOR TO ORDERING
MERCURY FUEL FILTER REMOVAL WRENCH
$37.50
MERCURY TILT CYLINDER WRENCH CAP SEAL REMOVAL REPAIR TOOL SPANNER
MERCURY TILT CYLINDER WRENCH CAP SEAL REMOVAL REPAIR TOOL SPANNER
The Moto-Stop Tilt Cylinder Wrench is made of steel with a black oxide finish. The pin assembly is made up of a heat treated Allen cap screw and has a 3/16" dowel pin pressed into the body. This assembly design allows you to replace a pin if damaged.
MEASURE YOUR ASSEMBLY PRIOR TO ORDERINGMERCURY TILT CYLINDER WRENCH
$69.50
MERCURY TRIM WRENCH
TRIM ROD REMOVAL TOOL
MERCURY TRIM WRENCH
TRIM ROD REMOVAL TOOL
The aluminum cap on the Mercury Trim Rod assembly has two holes however this wrench has eight holes for multiple position options. Trim wrench is made of steel with a black oxide finish. The pin assembly is made up of a 5/16-24" heat treated Allen cap screw and has a 3/16" dowel pin pressed into the body. This design allows you to replace a pin if damaged. This design is made for our latest model Mercury 2 Stroke motors. Our Mercury Trim Wrench will fit the trim rod cap that has 3/16" diameter holes with a center to center distance of
(1 7/32 or 1.218 ).
MEASURE YOUR ASSEMBLY PRIOR TO ORDERING
MERCURY TRIM WRENCH
$69.50
Mercury Bravo Spanner Wrench
Mercury Bravo Spanner Wrench
For Mercruiser X2 XR and Diesel Units The Mercruiser Bravo Spanner Wrench is a tool that fits over the drive shaft yoke once the drive shaft has been removed, and removes the U-joint bearing retainer. The new bravo spanner wrench replaces your old Mercury Marine tool and features eight removable heat treated pins. Replace that old tool that just doesn't do the job right with the Mercruiser Bravo Spanner Wrench.
The Mercury Bravo Spanner Wrench is a laser cut steel body with retainer bar and eight removable heat treated pins.
Mercury Bravo Spanner Wrench
$239.00
YAMAHA WRENCHES
YAMAHA WRENCHES
YAMAHA TILT
CYLINDER WRENCH
YAMAHA TILT
CYLINDER WRENCH
This Yamaha tilt wrench fits a rod that is 1 3/8" from center to center (at the widest dimension) the diameter of the pin is 1/4." The tilt wrench is made of steel with a black oxide finish. The pin assembly is made up of a heat treated Allen cap screw and has a 1/4" dowel pin pressed into the body.
This assembly design allows you to replace a pin if damaged.
MEASURE YOUR ASSEMBLY PRIOR TO ORDERING
This assembly design allows you to replace a pin if damaged.
MEASURE YOUR ASSEMBLY PRIOR TO ORDERING
YAMAHA TILT CYLINDER WRENCH
$69.50
YAMAHA MODIFIED TILT CYLINDER WRENCH
YAMAHA MODIFIED TILT CYLINDER WRENCH
Yamaha tilt caps come in two different sizes, we have modified our Yamaha tilt wrench to accommodate the smaller of the two caps. Center to center the pin dimension is 1 ½" across the widest distance and the pin diameter is 5/32." This modified tilt wrench is made of steel with a black oxide finish. The pin assembly is made up of a Allen cap screw and has a 5/32" heat treated dowel pin pressed into the body. This design allows you to replace a pin if damaged.
MEASURE YOUR ASSEMBLY PRIOR TO ORDERING
YAMAHA MODIFIED TILT CYLINDER WRENCH
$69.50
YAMAHA FUEL FILTER
REMOVAL WRENCH
YAMAHA FUEL FILTER
REMOVAL WRENCH
This specialty tool is designed to make your job easy by using the gear like groves at the base of the filter to create a solid grasp eliminating slippage and frustration. The Yamaha Fuel Filter Wrench slips over the Yamaha fuel filter, engages the teeth, and provides appropriate leverage. This tool is guaranteed to speed up filter replacement.
SPECS: 1/8” steel with black zinc finish for quality and durability.
MEASURE YOUR ASSEMBLY PRIOR TO ORDERING
YAMAHA FUEL FILTER REMOVAL WRENCH
$37.50
YAMAHA SMALL 1 1/4" TRIM ROD REMOVAL WRENCH
YAMAHA SMALL 1 1/4" TRIM ROD REMOVAL WRENCH
We make two sizes of the Yamaha trim wrench please measure for a sure fit.
This trim wrench was designed to solve the problem of removing the aluminum cap without destroying it. We use all four holes in the cap instead of two like other wrenches.
This trim wrench will fit the trim rod cap that has 5/32" diameter holes with a center to center distance of 1 1/4".
Wrenches are made of steel with a black oxide finish. The pin assembly is made up of a 5/16-24" heat treated allen cap screw and has a 5/32" dowel pin pressed into the body. This design allows you to replace a pin if damaged.
MEASURE YOUR ASSEMBLY PRIOR TO ORDERING
YAMAHA SMALL 1 1/4" TRIM ROD WRENCH
$69.50
YAMAHA IMPACT TRIM ROD REMOVAL WRENCH
YAMAHA IMPACT TRIM ROD REMOVAL WRENCH
This 3/8" drive impact trim wrench will fit the trim rod cap that has 5/32" diameter holes with a center to center distance of (1 1/4" or 1.25) usually a 2 stroke. This wrench was designed to solve the problem of removing the aluminum cap from the Yamaha trim rod assembly without destroying it . The cap has four holes and it makes more sense to use all four holes when replacement is needed, rather than two like most spanner wrenches.
Trim wrench is made of steel with a black oxide finish. The pin assembly is made up of a 5/16-24" heat treated Allen cap screw and has a 5/32" dowel pin pressed into the body. This design allows you to replace a pin if damaged.
MEASURE YOUR ASSEMBLY PRIOR TO ORDERING
YAMAHA IMPACT TRIM ROD REMOVAL WRENCH
$97.00
YAMAHA LARGE 1 1/2" TRIM ROD REMOVAL WRENCH
YAMAHA LARGE 1 1/2" TRIM ROD REMOVAL WRENCH
We make two sizes in the Yamaha trim wrench. This trim wrench will fit the trim rod cap that has 5/32" diameter holes with a center to center distance of 1 1/2" (or 1.500). This wrench was designed to solve the problem of removing the aluminum cap from the Yamaha trim rod assembly without destroying it . The cap has four holes and it makes more sense to use all four holes when replacement is needed, rather than two like most spanner wrenches.
Trim wrench is made of steel with a black oxide finish. The pin assembly is made up of a 5/16-24" heat treated Allen cap screw and has a 5/32 dowel pin pressed into the body. This design allows you to replace a pin if damaged.
MEASURE YOUR ASSEMBLY PRIOR TO ORDERING
YAMAHA LARGE 1 1/2" TRIM ROD WRENCH
$69.50